Get involved using #Loomies
Useful information:
Is it illegal to use stickers on motorcycles
Whether motorcycle decals need to be filed or not depends on the scope of decals. If the main color of the vehicle body is not changed, more than 50% of the vehicle body is not covered, and it does not hinder the driving of other vehicles, there is no need to go to the vehicle management office for filing.
Illegally refitting a vehicle means refitting the appearance, power system, transmission system and braking system of the vehicle beyond the design load capacity and function of the original vehicle, which is not allowed by national laws and agreed by the manufacturer. Including the replacing of key components.
After changing the body color, body or frame, the owner can go through the change registration with the vehicle management department within 10 days after the replacement. Refitting tire hubs, installing tail wings, lights, exhaust pipes, etc. are all illegal refits. They need to be restored to the original state in time to pass the inspection. At the same time, penalties such as fines and withholding certificates will be given.
Legal analysis: as long as the motorcycle sticker does not exceed 30% of the body area, it will basically have no problem, and the color of the sticker does not need to use the special color for special vehicles. The content of the sticker needs to be healthy. On the contrary, after the whole body sticker, it needs to go to the vehicle management office for filing, otherwise it will be checked by the traffic police.
Legal basis: Article 13 of the regulations for the implementation of the road traffic safety law :Where a motor vehicle is sprayed, pasted with signs or body advertisements, it shall not affect safe driving.
1. Pay attention to the laws and regulations when pasting car stickers. Some car stickers are too large to block the sight;
2. Some stickers are too bright in color, which is easy to distract other car owners and increase the possibility of accidents.
Therefore, pasting car or moto stickers is not free. If it is pasted on the window and other places that obviously hinder the line of sight or block the license plate, the traffic police will punish it. Too frivolous, provocative, violent and bloody, ignoring social norms and moral bottom line, vulgar and other car stickers should be avoided as far as possible.
How to apply the moto stickers to your motorbike
1、Wash and dry the location of the motorcycle you want to apply the sticks.
2、Measure the approximate size of the sticker you want to apply, then draw it on the back of the sticker and cut out the approximate shape in advance.
3, Cut out the back of the sticker paper to tear (do not tear off all at once). Stick a good side from top to bottom with a scraper (similar to credit cards and the similar things could be ok) . Slowly scrape, while scraping tear the back of the paper.
4, In the construction process, if you find the creases or the curvature of the words , use a grill gun (can be used instead of a household hair dryer) to heat the stretch edge. So as not to wrinkle (note that you can not always blow too heavily). You need blow while stretching not too much force , slowly stretch, and then paste while scraping tear the backing paper, paste to where the backing paper to tear there.
5, After applying done, use a knife to cut off the excess. The edge should be stuffed 3-5 mm, or bake with a hair dryer to ensure that the edge ist flat and firm. So as not to shrink or warp the stickers over time.
6, It is recommended that two people operating at the same time to reduce the difficulty of construction. The car shell is also best removed so that the sticker can be easily applied.